1 mA to 100 Amps AC/DC Low Current Clamp Meter CM100

Description

The CM100 low current clamp meter is designed to accurately measure current, current leaks (parasitic draws down to 1mA) and electrical loads from 1mA to 100 amp AC/DC and voltages from 0 to 600 AC/DC. The CM100 can be used on electric motors, fuel pumps, charging systems, electrical circuits, etc
The small diameter (½ inch or 13mm) and narrow jaw makes it ideal for use in confined spaces and on small gauge wires. Other features include up to 600 volt AC/DC voltage, resistance measurement functions, audible continuity test, display hold and peak detector

Features

Small jaw: 1.2″(W) x 0.53″ (D) (300×13.4mm)
Clamp opens up to 1/2 inch (12.5 mm)
One rotary switch operation
Large 4 digit LCD display
AC/DC Voltage measurement up to 600 Volt
AC/DC current measurement from 0.001 up to 100 A.
Relative measurement
One touch auto zero
Peak Hold Function
Data Hold Function
Resistance measurement.
2 readings per second sampling
Continuity check with audible indicator
Protective hand guard
Low battery indicator
Auto power off
50 hrs in use battery life
Soft carrying deluxe pouch
Test leads and batteries included

Technical Specifications
Display:
4 Digit LCD (Max. reading 9999)
0.393″(10 mm) Digits
Units indicator
Relative measure indicator
Display data hold indicator
Peak hold indicator
VDC/VAC indicator
Continuity indicator
Automatic over-range indication
Automatic( – ) negative polarity indicator
One touch button auto zeroing
Auto power off
Low battery indicator
Power source: Two (2) Standard AAA 1.5 Volt alkaline battery type AAA UM4 or equivalent
Test probes: One red and one black, 1000V/15A rated (IEC1010/EN61010 CAT II), 35½” long
Physical dimensions: 7.95″ (H) x 2.62″ (W) x 1.33″ (D) – 202mm (H) x 67 mm (W) x 33.8 mm (D)
Weight: Approximately 6.34 Oz ( 180 g) including battery

Electrical Specifications
DC Voltage: ± 2% ± 2 dgts., 600 V ac/dc maximum, 660Vrms overload protection
AC Voltage: ±1.5% ± 5 dgts., 50 to 500 Hz, 600 V ac/dc maximum, 660Vrms overload protection
DC Current: ± 2.5 % ± 10 dgts., 100 Amp. maximum, 150 Arms overload protection
AC Current: ± 2 % ± 10 dgts., 600 Amp. maximum, 150 Arms overload protection
Resistance: ±1% ± 3 dgts., 100KΩ 660Vrms overload protection
Continuity Test: Audible indicator (Buzzer) when circuit resistance is below 1000 Ω, max. voltage test < 3 Vdc.

Applications
Measure currents in circuits like battery chargers, alternators, leakage currents, electrical loads, etc.
Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.
Check components like: Alternator, Diodes, Relays and Ignition Coils, Spark Plug Wires, Magnetic Pickups, Motors, Switches, Fuses, etc.
An essential tool for all around troubleshooting of electrical and electronic circuit and systems

Ergonomic Features
The new smaller jaws and ergonomic profile compared with other models makes handling and operation easier and more convenient
Large easy to read 0.393″ (10 mm) digits display
Single knob selects functions
Peak hold function
Display data hold
Rugged plastic enclosure
Design allows comfortable handling
For use in
Electronic and electrical circuits
Automobiles
Trucks
Trailers
Boats
RVs
All 0 to 600 Volt AC/ DC powered circuits
Includes
CM100
Soft Pouch
2 x 35½” (0.9 m) test probes
2 x 1.5 V AAA alkaline battery
User’s Manual