Short Buddy Audible Trouble Shooter ES230

Description

The Electronic Specialties 230, Short Buddy, Short Buddy, Is the most time effective tool for locating

Shorts To Ground
Intermittent Shorts
Intermittent Shorts Caused by Loose Connections
Electronic Specialities 230 Short Buddy, Setting Circuit Amps for diagnosing short circuits
Set-able Amp Levels

10 15 20 25 30
Electronic Specialities Short Buddy, Reapplying power to a circuit duing diagnosing a short
Automatically Opens Circuit in Event of Overload

When the event of a dead short, the Short Buddy has a continues Open / Reset / Reapply power cycle continuing until the short is removed or unit is disconnected.

Electronic Specialities Audiable Short Finder tracer
Audible Indications

If the circuit current changes by approximately 0.3 of an amp, the Short Buddy signals with an Audible beep, That way if your heads under the dash or the Soft Buddy is at the other end of the vehicle you will know about it.

Electronic Specialities Professional Automotive Test Equipment
Quality tools from a reputable manufacturer

Based just outside of Chicago, Electronic Specialties is a Leading manufacturer of automotive testing instruments. Their products can be found at Matco Tools, Snap-on, …more

Great Time Saver

Electronic Specialities 230 Short Buddy Operation Illustration
Short Buddy helps you find the short! This unique tool connects at the fuse panel and becomes in series with the test circuit. A system of audible beeps helps you find the problem and permit hands free troubleshooting. Have a dead short? Short Buddy gives you continuous re-set/re-power capability, a real time saver. While you push, pull, tug and grab wires, Short Buddy is always watching the current level. If your tug causes the dead short again, Short Buddy opens the circuit for 10 seconds, then re-applies power to the circuit. Re-powering the circuit can also be done manually.

If the circuit current changes by more than approximately .3 Amps, you´ll hear an audible beep. If you pull on the “problem” wire or connector, you´ll hear the beep. When working under the dash or in a difficult area this is a huge help. Great tool for shorts, intermittent drop outs and flaky grounds & connections. A real time saver.